Powers Stainless Steel Power-Bolt Sleeve Anchor


When you want the best, use this bolt

Correctly placed, the Powers stainless steel Power-Bolt is one of the strongest and most durable anchors around. Even in arid climbing areas, the inside of bolt holes are damp. You want stainless.

The stainless steel Power-Bolt™ is a heavy duty sleeve style anchor that is removable and versatile. The 5-piece “sleeve” design has a greater wedging area than wedge-style bolts and is the right choice for any less-than-ideal rock (softer, grainier, or more fractured or hollow). It also works great in hard rock. Sleeve-style bolts are much easier to replace than wedge-styles, should that be necessary.


  • available in 2 lengths: 3/8″ x 2.25″ and 1/2″ x 2.75″
  • bulk discounts available!
  • 304 grade stainless steel
  • manufactured by Powers
  • use a 3/8″ stainless steel hanger with either of these bolts (see note below about the washers on the 1/2″ bolt). You may also use the 1/2″ hole-size hanger for the 1/2″ bolt.

See manufacturer’s technical specifications for load capacities and torque. Max torque is found on page 2 (12 ft-lbs for the 3/8″ size and 25 ft-lbs for the 1/2″ size).

Note: The included washer on 1/2 inch Power-Bolts are too big for the ClimbTech stainless steel hanger and won’t sit flat, which will prevent the bolt/hanger combo from seating properly. When using the hanger with a 1/2-inch Power-Bolt, either use a smaller aftermarket washer, or simply remove the washer entirely.

Bulk pricing discounts:

3/8″ x 2.25″ pricing / 1/2″ x 2.75″ pricing

1-19 : $4.75 / $7.25

20+ : $4.40 / $6.75

SKU: PBOLT Category: Tag:

You may also like…